Thursday, January 15, 2009

More on Trouble Shooting...Back Tracking....

As I have been informed, dealing with hardware related issues can make life tough and difficult. Through out my independent study, I have dealt with the problem of getting programs to transmit from the computer to the RCX unit. And just when I thought that I had figured it out (problem being that it didn't want to transmit when I was remoted into the computer), I find that once again, I am trying to figure why it won't transmit.

Since the last post I have:

  • Changed the battery in the IR transmitter (Doesn't seem to make a difference, although plugging it in fully does)
  • Tried changing a setting on the Serial Port through Windows, since someone mentioned on a forum that they had been able to get it to work but that it ran slow...so I tried turning off a buffer setting to see if that made a difference. It didn't. I then turned it back on.
  • So I then decided to see if I could load the Lego firmware back onto the RCX, it did it. Just fine and dandy!! I was able to load a NQC program on to the RCX brick and it worked just fine.

What I am thinking could be the problem is that the leJOS for the RCX is no longer being supported and Java has since moved onto a newer version. According to the leJOS website, it should work with Java 1.1 -1.5, I think that we might be on Java 1.6 or version 6 (that is if they haven't changed their confusing ways ;-) )So my next plan of action is to go dig up an older installer of Java that I have, in hopes that maybe installing an older Java will fix the problem and that any problems I do face, I will be able to solve quickly since I might have already seen them.

On a happier note: In doing this trouble shooting, I reinstalled the NQC program for my LucyLeia (she was still all together....Just wasn't connected to her brain ;-)). Then after reconnecting her up and running the program, I noticed she switch which side of her that she was putting the colors on. Taking a wild guess that this might have to do with the orientation of the Lego block with the wire was plugged onto the RCX, I turned it by 90 degrees so that the wire was now running off the side instead of the bottom, like I had first reconnected it. Ran the program again. And Exciting stuff....she switched back to the sides that she was dropping them before, when I first had connected her up.

Time since last post: 2 hours
Overall: 33 hours 25 minutes

0 comments:

Blogger Templates by OurBlogTemplates.com 2007